Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
EWD
Jedi Hopeful
Offline
Hi Folks -
Replacing the original boots on my 74TR6 and found a wrap of some type of tape (perhaps masking) in front of the upper ball joint where the end of the boot sits. Was this a “grease stop”?
If so, I assume it should be replaced?
Have cleaned out the old grease as best possible. For the initial greasing, I assume you coat the ball joints, wipe the steering rod on both ends, and give it the prescribed 5 shots?
Thanks,
Will
Replacing the original boots on my 74TR6 and found a wrap of some type of tape (perhaps masking) in front of the upper ball joint where the end of the boot sits. Was this a “grease stop”?
If so, I assume it should be replaced?
Have cleaned out the old grease as best possible. For the initial greasing, I assume you coat the ball joints, wipe the steering rod on both ends, and give it the prescribed 5 shots?
Thanks,
Will
