-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Steering wheel-removed but new wont fit +New Pics!
- Thread starter RickB
- Start date
Share this page
ChrisS
Jedi Knight
Offline
Re: Steering wheel - got it removed but new wont f
Update:
I've been buried at work and haven't had a chance to get to Ricks hub. Well last night I spend a little time in the machine shop and got it done. This is what rick had (from above)
This is what I came up with. It consists of a stock hub from a '74 parts car I had and a piece of 3/4" plate aluminum that was laying around. I turned the stock hub down to the steel core that has the taper and splines to match the column, then roughed out the plate and bore a hole to accept the stock core. One they were assembled I did the final trimming to fir the escutcheon that came with Ricks wheel. These are the results. I'll put in the mail today Rick.
Update:
I've been buried at work and haven't had a chance to get to Ricks hub. Well last night I spend a little time in the machine shop and got it done. This is what rick had (from above)
This is what I came up with. It consists of a stock hub from a '74 parts car I had and a piece of 3/4" plate aluminum that was laying around. I turned the stock hub down to the steel core that has the taper and splines to match the column, then roughed out the plate and bore a hole to accept the stock core. One they were assembled I did the final trimming to fir the escutcheon that came with Ricks wheel. These are the results. I'll put in the mail today Rick.
Attachments
racingenglishcars
Darth Vader
Offline
Re: Steering wheel - got it removed but new wont f
That's a bloody nice adaptor!
That's a bloody nice adaptor!
