-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Steering wheel-removed but new wont fit +New Pics!
- Thread starter RickB
- Start date
Share this page
ChrisS
Jedi Knight
Offline
Re: Steering wheel - got it removed but new wont f
Update:
I've been buried at work and haven't had a chance to get to Ricks hub. Well last night I spend a little time in the machine shop and got it done. This is what rick had (from above)
This is what I came up with. It consists of a stock hub from a '74 parts car I had and a piece of 3/4" plate aluminum that was laying around. I turned the stock hub down to the steel core that has the taper and splines to match the column, then roughed out the plate and bore a hole to accept the stock core. One they were assembled I did the final trimming to fir the escutcheon that came with Ricks wheel. These are the results. I'll put in the mail today Rick.
Update:
I've been buried at work and haven't had a chance to get to Ricks hub. Well last night I spend a little time in the machine shop and got it done. This is what rick had (from above)
This is what I came up with. It consists of a stock hub from a '74 parts car I had and a piece of 3/4" plate aluminum that was laying around. I turned the stock hub down to the steel core that has the taper and splines to match the column, then roughed out the plate and bore a hole to accept the stock core. One they were assembled I did the final trimming to fir the escutcheon that came with Ricks wheel. These are the results. I'll put in the mail today Rick.
Attachments
racingenglishcars
Darth Vader
Offline
Re: Steering wheel - got it removed but new wont f
That's a bloody nice adaptor!
That's a bloody nice adaptor!
