Steering wheel-removed but new wont fit +New Pics!

[RickB]

Re: Steering wheel - got it removed but new wont f

hmm...

Chris??

Where did you go?

 

[ChrisS]

Re: Steering wheel - got it removed but new wont f

There are some that are interchangeable. I'll look for my list.

 

[ChrisS]

Re: Steering wheel - got it removed but new wont f

Update:

I've been buried at work and haven't had a chance to get to Ricks hub. Well last night I spend a little time in the machine shop and got it done. This is what rick had (from above)

This is what I came up with. It consists of a stock hub from a '74 parts car I had and a piece of 3/4" plate aluminum that was laying around. I turned the stock hub down to the steel core that has the taper and splines to match the column, then roughed out the plate and bore a hole to accept the stock core. One they were assembled I did the final trimming to fir the escutcheon that came with Ricks wheel. These are the results. I'll put in the mail today Rick.

 

[racingenglishcars]

Re: Steering wheel - got it removed but new wont f

That's a bloody nice adaptor!

 

[bugimike]

Re: Steering wheel - got it removed but new wont f

Sweet! Nicely done Chris!!!

 

[jlaird]

Re: Steering wheel - got it removed but new wont f

I am very pleased with folks that can do that kind of work. Very nice.

 

[RickB]

Re: Steering wheel - got it removed but new wont f

Wow Chris!!!

That's a Beauty!!!
It's going to be fantastic getting the new wheel in - WOW!