• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Steering Wheel Removal

Share this page

7

777jag

Member
Offline
I would like to remove the moto lita steering wheel from my 1967 BJ8 so I could sand and polyurethane the wheel. What are the steps to remove the wheel.

thanks to all
 
777jag said:
I would like to remove the moto lita steering wheel from my 1967 BJ8 so I could sand and polyurethane the wheel. What are the steps to remove the wheel.

thanks to all
Click to expand...
Might want to look at the photo in Moss catalog first. Briefly though, you first have to remove the turnsignal, then, if you have a adjustable steering wheel, disconnect the circlip on the steering column then with a steering wheel puller attached lift the wheel off. If you have a non-adjustable wheel remove the nut holding the wheel on the column and with the puller lift the wheel. It's a little more difficult than that but that's the sequence.
Good Luck
 
I found that the trafficator removal and reinstallation was made easier by desoldering some or all of the bullets from the harness (steering box side). And attaching a strong pull string to be left behind in the tube when you reinstall the trafficator. (on adjustable wheels)
 
Surely with a Motalita you can separate the wheel from the boss in situ, leaving the boss (and indicator assembly) in place. Much simpler method, and you dont have to worry about centralising the wheel when it goes back
 
The mounting adapter or hub is the boss. Duh yes remove the many surround nuts, no need to remove the trafficator. Too obivous.
details.php


This is a Lempert wheel pic but it should be the same.
 
Back
Top