• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Steering box cam problem!

Share this page

J

John_Progess

Jedi Warrior
Country flag
Offline
After I dissassembled the steering box on my 64 BJ8 I noticed that the cam bearing races on both ends were pitted which made the rotation of the shaft feel rough. The bearings both look good. Has anyone found a good repair for this problem? Thanks again!

John
 
Yep John, Replace the entire lot.---Keoke
 
OH, just go to a bicycle shop-Just kidding John. I got them from the usual suspects so I would contact Healey Surgeons for them as well as Sports and Classics.---Fwiw---Keoke
HI I just took a look at the Moss site they show them under "Steering"
 
Back
Top