dklawson
Yoda
Offline
Additional background information is in the thread linked below.
https://www.britishcarforum.com/bcf...pitfire-Mistake-Advice-Needed-Re-Head-Gaskets
Today I am taking my engine (in pieces) to the machine shop. While collecting information regarding 1500 engine rebuilding I found the article linked to below. The author is commenting that boring the 1500 out any more than +20 is questionable if you don't deck the block to remove the head gasket fire ring spotfaces... and use the earlier flat 1300 gasket set. A
Can I get comments from any of you who have faced this? I anticipate that the shop is going to tell me they need to go to +60 from its current +30. Should I anticipate having to deck the block flat and remove the spotfaces?
Link:
https://triumphspitfire.rickbaines.com/weaknesses-of-triumphs-1500-engine/
Doug L.
https://www.britishcarforum.com/bcf...pitfire-Mistake-Advice-Needed-Re-Head-Gaskets
Today I am taking my engine (in pieces) to the machine shop. While collecting information regarding 1500 engine rebuilding I found the article linked to below. The author is commenting that boring the 1500 out any more than +20 is questionable if you don't deck the block to remove the head gasket fire ring spotfaces... and use the earlier flat 1300 gasket set. A
Can I get comments from any of you who have faced this? I anticipate that the shop is going to tell me they need to go to +60 from its current +30. Should I anticipate having to deck the block flat and remove the spotfaces?
Link:
https://triumphspitfire.rickbaines.com/weaknesses-of-triumphs-1500-engine/
Doug L.