Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Skip & Lynne
Jedi Warrior
Offline
Anyone know where I can get my speedo redone. Thanks Skip
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Speedometer repair
- Thread starter Skip & Lynne
- Start date
Share this page
Offline
Margaret Lucas
Mo Ma Manufacturing - instrument repair
13211 Second Street. NW
Albuquerque, NM 87102
Ph (505) 766-6661 - Fax (505) 766-5419
momanm@aol.com
D
Mo Ma Manufacturing - instrument repair
13211 Second Street. NW
Albuquerque, NM 87102
Ph (505) 766-6661 - Fax (505) 766-5419
momanm@aol.com
D
OP
Skip & Lynne
Jedi Warrior
Offline
Thanks Dave as usual you are a big help. I will call her tomorrow morning. Skip
tahoe healey
Yoda
Offline
I used West Valley Auto Electronics in Resida, CA (LA area). Phone (818) 758-9500. The guy has been there forever. They were fast and accurate. They have Smith parts. Were ever you go, send the cable to be checked as well. The length must be exact! The repo cables are apparently too long and cause damage to the speedo unit.
Offline
[ QUOTE ]
The length must be exact! The repo cables are apparently too long and cause damage to the speedo unit.
[/ QUOTE ]
Just check the distance from the face of the cable outer housing flange to the end of the inner cable. The cable should stick out no more than 3/8". Grind off a bit of the inner cable end if needed.
I think the guy at West Valley may have been Margaret's partner at one time.
D
The length must be exact! The repo cables are apparently too long and cause damage to the speedo unit.
[/ QUOTE ]
Just check the distance from the face of the cable outer housing flange to the end of the inner cable. The cable should stick out no more than 3/8". Grind off a bit of the inner cable end if needed.
I think the guy at West Valley may have been Margaret's partner at one time.
D
Offline
[ QUOTE ]
Anyone know where I can get my speedo redone. Thanks Skip
[/ QUOTE ]
For anyone in the DC/Baltimore area there is a place called Safety-Chek very near the BWI airport. See Bob--he is good and quick.
Anyone know where I can get my speedo redone. Thanks Skip
[/ QUOTE ]
For anyone in the DC/Baltimore area there is a place called Safety-Chek very near the BWI airport. See Bob--he is good and quick.
newmexTR3
Jedi Trainee
Offline
FYI, the correct address is
1321 Second Street NW
Albuquerque, NM 87102
Ph (505) 766-6661 - Fax (505) 766-5419
momanm@aol.com
I'm in Albuquerque today and I'm taking the speedo & tach there. They do great work.
Cheers,
Gavin
1321 Second Street NW
Albuquerque, NM 87102
Ph (505) 766-6661 - Fax (505) 766-5419
momanm@aol.com
I'm in Albuquerque today and I'm taking the speedo & tach there. They do great work.
Cheers,
Gavin
longbridgehealey
Obi Wan
Offline
Nisongers just did mine - it looks great! They did the combo gauge and the speedo. If you give them an extra $40.00 they'll do it in five days.
longbridgehealey
Obi Wan
Offline
oops - I just answered a four year old thread......
Agatha A Healey. All her gauges went to Mo Ma and she couldn't be happier.
