• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Spark plugs for 61, BT7

  • Thread starter Deleted member 12902
  • Start date

Share this page

D

Deleted member 12902

Guest
Guest
Offline
What spark plugs should I use in my 61, BT7? It has been suggested that I use a Champion RN12YC. What affect will using a resistor plug have on engine performance and will it cause a colder spark due to the resistor?
Thanks,
Pete
rusty1c
 
I've used RN12YC for about 130K miles with no problems I can attribute to the plugs (rotors, wires, etc. well, that's a different story). I've used these plugs with modern, noise-suppression wires but these don't play well with the stock caps so went to stranded copper wire as original. Any equivalent plug--NGK come highly recommended--should work fine.

I believe the resistance in the plug is insignificant compared to the resistance of the gap.
 
Last edited:
Any modern equivalent plug I like Bosh Platinum's
 
Back
Top