• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A source for those little drain hoses

sp53

Yoda
Country flag
Offline
Has anyone found a source for those little drain hoses that go on the trunk channel and out of the vent drain. I think one of the not so well known venders has them. I cannot find any thin walled ½ hose in black around here.

In addition I learned something new about the heater hose orientation yesterday. There is actually a small factory notch in the under part of the vent to give room for the heater hose. My hose was pinching off at the top and then I finally pushed into the notch and that gave room for the hose.
steve
 
When I was doing my 3 most of the parts came from Moss and Victoria.
 
MOSS drain number 680-825
Victoria 14-351
 
So that's what the depression is for. I made a new vent system for my car and studiously copied all the details. Wondered at the time why the leading edge of the tray was depressed like that. Guess I would find out eventually when I get around to fitting things like heaters. Now I know!
 
Back
Top