Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I would like to rebuild the heater box in my E-Type. Interior is rusty, seals are shot, spring between flapper and cable is missing and core is probably clogged up. My manual says the first step is to drain the radiator and block. Is that really necessary? It looks like the heater core may be slightly higher than the radiator.
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
SII E-Type Heater Box
- Thread starter DJames
- Start date
Share this page
Offline
Probably best to drop some water before removal.
I would check your bulkhead crossover tubes while you are at it.
Good luck.
I would check your bulkhead crossover tubes while you are at it.
Good luck.
Offline
How old is the coolant?
Crud likes to build up in the intake as well, so a flush isn’t a bad idea.
Crud likes to build up in the intake as well, so a flush isn’t a bad idea.