• Hi Guest! Being a Paying Supporter is NOT a requirement to participate at BCF. However, subscribing will help ensure we can continue to serve the LBC community for years to come. If you enjoy BCF and find our forum a useful resource...Please consider supporting us by **Upgrading**
    (PS: Subscribers don't see this banner)
Tips
Tips

Should I rebuild or replace - clutch master?

RickB

Yoda
Offline
This is on a 78 Midget so what's best? Rebuild or replace?
What's the best source for rebuild kit and / or new clutch master cylinder?
 
OP
RickB

RickB

Yoda
Offline
I ordered a new master from PeterC.
 

JPSmit

Moderator
Staff member
Silver
Country flag
Online
Ahh, in which case I pick - NEW! :excitement:
 

nomad

Yoda
Offline
Can you get OEM yet Rick?
Regardless, Peter would be selling quality.

Kurt.
 
OP
RickB

RickB

Yoda
Offline
Right, I trust Peter.
He told me just what I'd be getting before we agreed, he also put it in the mail yesterday right after I paid.
Since this is going in my Bugeye Midget with the Miata and Nissan partsI don't much care about originality - I just want a clutch that works well.
If it were for the 73 out in the shed that would be a different story altogether. :cool:
I should have had him throw in a rebuild kit now that I think of it, I'll rebuild the old clutch master of course.
 
Similar threads
Thread starter Title Forum Replies Date
2wrench Should I attempt lower end rebuild myself? Triumph 34
S TR6 Should I Buy This "73 Triumph TR6" Triumph 3
T TR2/3/3A Should there be a body ground strap to battery on TR3 Triumph 7
BN6_2197 How regular should I change the gearbox oil? Austin Healey 5
AngliaGT Why You Should Double - Check Your Parts When You Receive them. Spridgets 2
Got_All_4 TR6 Should I paint the inside of the block? Triumph 17
S Well, this should be interesting..... Other Cars 9
KVH TR4/4A Should I Cut the Lower Windshield Gasket Triumph 2
C MGB Should I lubricate the cog gears MG 2
55modified Should I remove driver's side fender to work on footbox on my BN1? Austin Healey 14
George Zeck What fuel gauge SHOULD I have? Spridgets 3
B How often should you change the rear rear axle oil Austin Healey 9
B TR6 Should the poly diff mounts be snug to the studs? Triumph 2
Sopwith_Camel 95 xj r cheap should i run away screaming? Jaguar 2
abarth69 Should I remove this section Spridgets 8
L Should I do it?? [electrical conversion] Austin Healey 24
B TR2/3/3A what adjustment should i select with Koni shocks onTR3? Triumph 4
T TR4/4A Should I use ARP Assembly Lubricant for Engine Assembly and Fastener Installation? Triumph 2
F Exhaust gas analyser - what carbon monoxide level should I expect from my BT7? Austin Healey 7
K TR2/3/3A How long should an SU damper top up last? Triumph 22
M TR2/3/3A What oils, lubes etc should I have at my house at all times? Triumph 39
Got_All_4 TR2/3/3A What color should these parts be? Triumph 4
Joe Reed MGB Wiring problem....this should be fun :[ MG 4
stretchit2 Portable Hardtop Rack - Should it stay or should it go Austin Healey 28
M TR6 Should I buy a TR6? Triumph 24
Keoke Everone should own one Austin Healey 14
W TR2/3/3A '56 TR3 St 15000+ should have disc brakes... Right? Triumph 33
K TR2/3/3A How much oil should the steering box have in it? Triumph 6
Wirewheels General Tech Do we really care what our LBC's speedometer reads? Should we? MG 7
S TR6 Worth Saving??? What do you think we should do? Triumph 30
GTP1960 TR2/3/3A Should you paint your leaf springs? Triumph 5
2billydavies TR2/3/3A what bolts should i use to mount engine on an engine stand? Triumph 13
V General TR should or shouldn't? Triumph 19
R TR4/4A Replacing Door and Window Handles _ Should Be Simple - But Its Not Triumph 4
R TR4/4A About to put in an OD Transmission. What else should I do while in the air Triumph 7
T TR2/3/3A Should I put flat washers on sump bolts? Triumph 3
E How much should i pay for a complete 100/4 engine ? Austin Healey 4
luke44 General TR Every TR Owner should really appreciate this picture. Any guesses? Triumph 7
M TR4/4A Where should TR4A carpet snaps be placed? Triumph 10
J TR4/4A 1965 TR4 in pieces, What should we do with it? Triumph 9
Got_All_4 TR2/3/3A What color should this part be? Triumph 5
JPSmit Bring a Trailer should be banned Other British Cars 3
M How well should the water pump free spin? Spridgets 4
C What should the VIN plate look like for a BN1? Austin Healey 1
N Spitfire Should this be bent? Triumph 4
PatGalvin TR2/3/3A what color should it be...? Triumph 7
C Inner Sill Assembly Should i spend extra money on kilmartin brand??? Austin Healey 4
60TR3A Should My '63 BJ7's Carburetors Have Brass Caps or Black Plastic? Austin Healey 3
drooartz MGB Now I should be nice and cool MG 6
Boggsy64 MGB Driving 1977 MGB 2000+ miles any concerns I should look in to?? MG 13

Similar threads

Top