• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

seat belt intallation in late BJ8

Share this page

00
John_Progess said:
Patrick,
My car is an early 64 phase I. The only studs on the rear fender wells are two 5/16" studs on each fender well that receive the chrome acorn nuts.--- :savewave: Those studs are for mounting driver shoulder seat belts.

Keoke,
About how high can the dual lock assembly stick up above the seat sourround?--

The type attached to springs will lay down if you lower the luggage rack-

On my car the entire rear seat back/luggage platform was missing. I have a pattern so I can make one. Thanks for the help and have a good day!--- :thankyousign: Good show Greg :thumbsup:
------------------------------------------------Keoke
John
Click to expand...
 
John,

If you have a pattern/drawing for the rear seat back/ shelf, can you share? I have my original, but it is deformed and I have to decide how to replace some of the panels.

Jerry
 
Jerry,
I have a sample of all the pieces that makeup the rear parcel shelf. Are you looking for a particular piece or do you need a dimensional drawing of everything? Thanks and have a good day!

John
 
Jerry,
You can borrow mine. I also want to recover mine. It is now off the car. I need to remove the metal and get it replated.
 
Mine has some warped wood and a bent metal shelf. I was looking for the drawing so I could re-fabricate. We put in the vinyl and carpet in the back seat yesterday and it looks pretty good. I still think there should have been thicker padding under the vinyl. It does not look too comfortable.

Jerry
 
Back
Top