• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A scuttle vent

cityslicks

Freshman Member
Offline
What's the secret to re installing the scuttle vent lid???seems like the cable is too long and re attaching the cable to the vent screw lid is difficult to say the least I must be doing something wrong .
 
It depends on the center pivot rivet; if that has a snap ring then hook up linkage as 2 pieces at both ends then put the rivet and snap ring on last as you bring those 2 together. The barrel that the cable goes through needs some free play so the whole assembly can fold in on itself. The large spring with 2 ears can go on later also.
steve
 
It is challenging to get installed.

Mine had a rod rather than a cable.

David
Side view.jpg
The mechanism. Home made as the original was missing. I bought a rusty one on e bay and copied it.

It works.jpg
Installed.
 
It is a tricky little beast, it was the first thing I fitted after my rebuild because there was nothing in the engine bay and I could stand right up close, good luck.

Graham
 
Back
Top