• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A Routing of TR4A Fuel Line

Share this page

KVH

KVH

Obi Wan
Silver
Offline
I found this pic online. Is it safe to say that the fuel line on a 4A runs through the T-Shirt?

1688946477043.png
 
Yes, I can't imagine any other way it could be routed. Otherwise, at some point, it would have to cross under the frame, I think, and that really wouldn't be a good design.
 
Yes, thanks, I just saw a drawing that had me concerned. It showed grommets that made me suspect frame pass/thrus, but I suppose the grommets are just buffers ( or who knows). Probably just me looking for something to worry about.
 
KVH said:
Yes, thanks, I just saw a drawing that had me concerned. It showed grommets that made me suspect frame pass/thrus, but I suppose the grommets are just buffers ( or who knows). Probably just me looking for something to worry about.
Click to expand...
Some of the parts suppliers call out fuel line grommet CD23720 for the TR4A. This is incorrect; however I believe it is needed for the TR4. The 4A lines do not go through the frame; only through the t-shirt.
 
Just went thru this routing and I was concerned about the exhaust being close but that is the factory routing. There is a one or two clips inside the "tunnel" to hold the line. Bruce
 
Back
Top