• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Richmond VA 1960 Bugeye Bringing Miss Eva back to life.

That must be a universal arm offered in several different finishes. All seem to be about 14" overall length. I have a black one on order from eBay. Should be here next week.

I have 2 or three metric bolts. and a few coarse thread.

I bought this when I redid mine (Delco alternator)

https://www.amazon.ca/Spectre-Perfo...3&sr=1-1-f7123c3d-6c2e-4dbe-9d7a-6185fb77bc58

I think places like autozone carry it. I was concerned about it being chrome but it looks fine and I beat it up enough (and cut it) installing it.
 
First Bath! Needed to clean it up for the final stretch.

Too many people see dust and cannot help but touch. Not a good combination for paint.
9HR2Q00.jpg

8QCVQjv.jpg

jm6PA4b.jpg

f44CsvF.jpg

5rukgn7.jpg

Seems like my wife is getting excited. Miss Eva is a tribute to her Grandmother Eva Haines. She was pretty, fun and a classic.
 
Wow, it is looking great. I am tossing up whether I paint my car a mid metallic silver or grey like yours (with red interior). Thanks for the brilliant images.
 
Electronic Ignition Distributor for Austin Allegro Sprite Hillman Minx

f5546H7.jpg


For less than $60 delivered, it is worth giving it a shot. Guys on the Corvette Forum are having a great deal of success with this type of Electronic Distributor.
 
Car looking great! Are there settings on that dissy for different motors, etc....
 
Re: Trim on Door Openings

Things are moving quickly. Door seals look good. Wiring i’m Down to fettling with to new horns and then can install doors. Garage time this am. Then come Interior.
 
I would not advise using that water pump tab I did it worked for two seasons
the alternator as small and light as it is It vibrates an needs a third point- horizontal brace
it cracked and broke off ruined the water temp arrangement and very nearly shorted to the chassis.
CD49588E-72A0-4746-8DDA-ABDC25A491DF.jpg
 
To mount it more solid I used the old generator unubtainium bracket as the third horizontal piont
still rough looking but the concept works No vibration solid I’ll make it pretty this winter Still have driving to do this fall
9CA56C11-38C2-4C34-A161-AA728353F6B8.jpg2DE1F419-C52A-45E5-84AC-4FE67C303BEC.jpg43E8E40C-4442-44B1-A4E0-4F66C8591A75.jpg
 
I would like to do that too! Those new vettes are mighty impressive at a great price
 
Back
Top