Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
mickdaly
Freshman Member
Offline
Did you ever get an answer? This is my issue too!
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Removing BJ8 'Adjustable' Steering Wheel Hub
- Thread starter pkmh
- Start date
Share this page
OP
pkmh
Jedi Warrior
Offline
Hi Mickdaly,
Sorry I'm late here. I've been away for a long time. But to answer your question, hmm...It's been a while since I've looked back there at my trafficator (13 years, give or take). But what I do remember and what I found most important (and which is why I kept of record sketch of it), is the wire setup and their proper locations. I fail to recall any wires that are welded nor any crimped fasteners, off hand. What I find that is most important and worthy of documenting is, there are "3" green wires back there. If you attempt to removed these wires, number label and tape each wire for reference and ease of reassembling (I like to be somewhat lazy and not have to think about how all these bits and pieces go back together). Below is a sketch I prepared (yes, sketchy but still worthy to me).
Hope this helps in some way...
Paul
Sorry I'm late here. I've been away for a long time. But to answer your question, hmm...It's been a while since I've looked back there at my trafficator (13 years, give or take). But what I do remember and what I found most important (and which is why I kept of record sketch of it), is the wire setup and their proper locations. I fail to recall any wires that are welded nor any crimped fasteners, off hand. What I find that is most important and worthy of documenting is, there are "3" green wires back there. If you attempt to removed these wires, number label and tape each wire for reference and ease of reassembling (I like to be somewhat lazy and not have to think about how all these bits and pieces go back together). Below is a sketch I prepared (yes, sketchy but still worthy to me).
Hope this helps in some way...
Paul
