-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
remove BJ8 dash ?
- Thread starter Bobtruck
- Start date
Share this page
Offline
you'll need to remove bolts that go through the bracket, windshield post on the left hand side. All of the gauges. There's a stud at the very top of the wood that has a nut holding it on so take that off. Loosen the center facia panel after you remove the arm rest and console. Swinging the center facia panel away from its attachment points should allow you easier access to the 4 screws that attach it to the the wood dash. I suppose you could disconnect the gauges and leave them in place except for the Safety gauge, but I liked everything out of the way when I did mine. The stud at the top backside is easier to get to with the tach and speedo in place.