Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I want to put new bushings in the head stock of a Star lathe. My brother-in-law tried to turn a large piece of wood and jammed the headstock. At last measure the headstock is out .007" and this is not acceptable. I think I need new babbit bearings but need to find a place that knows what they are doing.
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Rebuilding a Metal Lathe
- Thread starter LLAngus
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Probably poured babbitt, right ? Not too many places that do that any more ... but I got almost 1000 hits on Google for "pouring babbitt", including this one :
https://owwm.com/krucker/BandSaw/Bearings1.asp
https://owwm.com/krucker/BandSaw/Bearings1.asp