Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
well i have a rubber bummper mifget and i desided to take off the bummpers cause its just dead weight. well i have the front looking good but the back bumper monts are pretty bad looking so i need some ideas of wat to do back there i was thinking nerf bars but i cant find any wat do you think
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
rear mont holes on a 76 midget
- Thread starter midgetboy
- Start date
Share this page
https://viewmorepics.myspace.com/index.cf...d9-b24dbdd4cf4c
look at that and you can see what i did to the front
look at that and you can see what i did to the front
SilentUnicorn
Yoda
Offline
guess i am blind, i cant make out much of that front end at all. I wouldnt mind going bumperless in the back and had not thought of using just bumperettes, Neat idea. My question would be what do you folks do about DMV inspections? NO bumpers would seem to be a no pass/no sticker deal.
mark
mark
[ QUOTE ]
put 'em on the day before inspections? /ubbthreads/images/graemlins/wink.gif
We don't do inspections out here, so it's pretty straight forward....
[/ QUOTE ]did you put driving lights on your frame rails after you took your bumpers off like my pic up there somewhere the link i posted
put 'em on the day before inspections? /ubbthreads/images/graemlins/wink.gif
We don't do inspections out here, so it's pretty straight forward....
[/ QUOTE ]did you put driving lights on your frame rails after you took your bumpers off like my pic up there somewhere the link i posted
GB1
Yoda
Offline
Nice, no inspections, I was wondering about that. I agree about the un needed weight, that that is the one thing that I didn't like about the rubber bumper midget that I had owned. The second was the front suspension is to high (another day).
I would think that some BE rear bumpers painted black would cover the wholes and fit the scheme.
Patrick
I would think that some BE rear bumpers painted black would cover the wholes and fit the scheme.
Patrick
[ QUOTE ]
Nice, no inspections, I was wondering about that. I agree about the un needed weight, that that is the one thing that I didn't like about the rubber bumper midget that I had owned. The second was the front suspension is to high (another day).
I would think that some BE rear bumpers painted black would cover the wholes and fit the scheme.
Patrick
[/ QUOTE ]yea i lowerd myn like i think an inch and a half and it mad a big diff with handling now i wont to get a thicker sway bar for the front
Nice, no inspections, I was wondering about that. I agree about the un needed weight, that that is the one thing that I didn't like about the rubber bumper midget that I had owned. The second was the front suspension is to high (another day).
I would think that some BE rear bumpers painted black would cover the wholes and fit the scheme.
Patrick
[/ QUOTE ]yea i lowerd myn like i think an inch and a half and it mad a big diff with handling now i wont to get a thicker sway bar for the front
RobSelina
Jedi Warrior
Offline
[ QUOTE ]
[ QUOTE ]
put 'em on the day before inspections? /ubbthreads/images/graemlins/wink.gif
We don't do inspections out here, so it's pretty straight forward....
[/ QUOTE ]did you put driving lights on your frame rails after you took your bumpers off like my pic up there somewhere the link i posted
[/ QUOTE ]
Yea, up front I went with a couple of fog lights:
out back, I just put some hardware in the two holes and called it a day:
Sorry, couldn't find a closer shot of the rear...
[ QUOTE ]
put 'em on the day before inspections? /ubbthreads/images/graemlins/wink.gif
We don't do inspections out here, so it's pretty straight forward....
[/ QUOTE ]did you put driving lights on your frame rails after you took your bumpers off like my pic up there somewhere the link i posted
[/ QUOTE ]
Yea, up front I went with a couple of fog lights:
out back, I just put some hardware in the two holes and called it a day:
Sorry, couldn't find a closer shot of the rear...
[ QUOTE ]
[ QUOTE ]
[ QUOTE ]
put 'em on the day before inspections? /ubbthreads/images/graemlins/wink.gif
We don't do inspections out here, so it's pretty straight forward....
[/ QUOTE ]did you put driving lights on your frame rails after you took your bumpers off like my pic up there somewhere the link i posted
[/ QUOTE ]
Yea, up front I went with a couple of fog lights:
out back, I just put some hardware in the two holes and called it a day:
Sorry, couldn't find a closer shot of the rear...
[/ QUOTE ]looks like mine. did you lower both the front and the back or neither?
[ QUOTE ]
[ QUOTE ]
put 'em on the day before inspections? /ubbthreads/images/graemlins/wink.gif
We don't do inspections out here, so it's pretty straight forward....
[/ QUOTE ]did you put driving lights on your frame rails after you took your bumpers off like my pic up there somewhere the link i posted
[/ QUOTE ]
Yea, up front I went with a couple of fog lights:
out back, I just put some hardware in the two holes and called it a day:
Sorry, couldn't find a closer shot of the rear...
[/ QUOTE ]looks like mine. did you lower both the front and the back or neither?