• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Question- Spridget & MGB Zenith flanges?

Share this page

B

Billm

Yoda
Country flag
Offline
As the title says- does a Midget Zenith carb and an MGB Zenith carb have the same mounting bolt spacing? I am thinking about putting an HS4 on a friend's '79 MGB and don't have an MGB manifold to measure (here).
Bill
 
Not sure about the B but the ZS and the HS4 do not have the same bolt spacing - but it is only 20 minutes to adapt the HS4 with a file
 
Bill

Most likly not as the Midget ZS has a 1.5 inch throat and the MGB ZS has an 1.75 inch Throat. Also, the Midget ZS is held by two studs while I belive the MGB uses four studs.
 
Back
Top