• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Question- Spridget & MGB Zenith flanges?

Share this page

B

Billm

Yoda
Country flag
Offline
As the title says- does a Midget Zenith carb and an MGB Zenith carb have the same mounting bolt spacing? I am thinking about putting an HS4 on a friend's '79 MGB and don't have an MGB manifold to measure (here).
Bill
 
Not sure about the B but the ZS and the HS4 do not have the same bolt spacing - but it is only 20 minutes to adapt the HS4 with a file
 
Bill

Most likly not as the Midget ZS has a 1.5 inch throat and the MGB ZS has an 1.75 inch Throat. Also, the Midget ZS is held by two studs while I belive the MGB uses four studs.
 
Back
Top