-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
MGB-GT Question - removing front bearings
- Thread starter drooartz
- Start date
Share this page
Offline
3/8" diameter long brass drift and tap it out from the "outside." There are two undercut recesses in the casting, 180° opposite each other to allow you to tap equally for removal... the spacer tube will move around enough to allow you to do it. May want to clean the hub thoroughly with mineral spirits to see what the old grease is hiding. :wink: