Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Does anybody know if this look like the right shut face finisher set for a BJ7? The top doesn’t seem to fit right. Maybe it just needs to be trimmed. If it is how does the piping attach between the trim piece and the shut pillar assembly? Any help or pics is much appreciated!
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Question about BJ7 Shut Face Finisher Fit
- Thread starter PeterB
- Start date
Share this page
Offline
Apparently, the repros need to be trimmed at the top. https://www.britishcarforum.com/bcf...ut-face-finisher-where-to-purchase-a-good-set Here's a picture of the original ones on my BJ7. The windlacing is put on behind the finisher and held in place between the shut face and the finisher.
Healey Nut
Luke Skywalker
Offline
Yep they require some CAREFULL trimming and massaging (beating into shape) to get the fit you need . Remember every car is different and sillpositions and shut face placement etc are not all the same .
British_Recovery
Jedi Warrior
Offline
You might want to remove the core of the black vinyl trim near the top end where it makes a sharp curve.
Bob
Bob