• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Progress.....

Share this page

Dadandson

Dadandson

Jedi Trainee
Offline
Here so far is the fruits of my labor. Still needs to have the gas tank cleaned out and the sending unit replaced.
 

Attachments

  • 10336.jpg
    10336.jpg
    43.9 KB · Views: 148
  • 10337.jpg
    10337.jpg
    69.6 KB · Views: 149
VERY NICE!! What are those wheels?
 
Nice work. Y'all are making me feel like a sloth -- I've got all these parts to install, and have done nothing all winter...
 
Lovely, just lovely.
 
drooartz said:
Nice work. Y'all are making me feel like a sloth -- I've got all these parts to install, and have done nothing all winter...
Click to expand...

Me too!! (And I don't even have the weather issues to deal with!!!) :eeek:
 
Regarding Tony's question, those are Eagle racing wheels I found on Craig's list here in Gilbert for $50 for all four. they came off a Ford Escort wagon. The hole spacing was 4 X 100MM, about 1/16 short. They are also 1/2 wider. I made rear wheel spacers 1/2 thick so they would not rub the leaf springs with 4 holes at 4" and installed 4 new studs at 100MM, 90 degrees rotated to accomodate the rim spacing. The front were more complicated. I had to machine new counterbored holes at 4" spacing and by making washers out of pre heat treated 4340 steel with a hole and countersink I was able to accomodate the 4" spread. The tires cleared the fenders fine in front so I did not need a spacer/shim. Everything went together perfectly except I need to carry two lug wrenches because of the rear wheel spacers. The car is at the MG shop now where Glen is putting in a new clutch. I can take some pics and post it here later this week if you like. I did not want spend $600 plus for MiniLites and it was going to cost $200 plus to have the Rosestyle wheels powder coated.
 
Back
Top