Offline
The forward-most lift-the-dot fastener on my passenger door has come out. It is the kind with a long screw shank. I assumed it had been screwed into the block of wood that locates the side screens, but there is no wood directly behind it. So, I purchased a fastener with a bolt shank and nut to install. Surprise when I took the panel and then the topper off the door, that piece of wood is three pieces that form the top of the door and the outer door skin appears to be nailed to it. There is no way I am going to try to remove that to get to the back of my fastener hole. So, what is a reasonable fix - stuff JB Weld, Gorilla Glue, liquid nails, etc in the hole and reinsert the fastener or _____?
Thanks in advance,
Thanks in advance,