• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Power Hacksaw

Share this page

TomMull

TomMull

Darth Vader
Silver
Country flag
Offline
https://www.youtube.com/watch?v=5gY1B1eJwAo
I've been on this earth for 69.5 years and never needed one of these. Now I have one and still don't need it. But it is accurate, cuts dead square and is great fun to watch. Everyone should have one.
Tom
 
very cool - looks like it should be steam powered
 
Hang ON!!

If in the next 1.5 years you get a big Healey you will be so glad you own that power saw.:glee:
 
JPSmit said:
very cool - looks like it should be steam powered
Click to expand...

Yes, exactly, now that you mention it. Reminds me of my friend's toy steam engine that runs on rum. Tom
 
I've always wanted one for the shop, but a good used one goes for around $700 and up. An industrial quality one goes for over $2000. Don't know how true of a cut the cheap ones would be. PJ
 
PAUL161 said:
I've always wanted one for the shop, but a good used one goes for around $700 and up. An industrial quality one goes for over $2000. Don't know how true of a cut the cheap ones would be. PJ
Click to expand...

You can pay a lot from used tool specialists, both on line and the few left with store fronts but they are far from high demand items and can be bought reasonably, if you have the time and inclination to look around. Mine is somewhere between the half ton heavy industrial type and the benchtop. With it's cast iron base and motor it weighs close to 200 lbs. I paid $300 including a good supply of replacement blades. It seems well designed having adjustments for blade tension and cutting pressure including a relief on thee backstroke. It has a drip oiler. The vice works great for straight right angle cuts. However, when cutting miters, the further fro 90 degrees you get, the more difficult it becomes to clamp the work. Secure clamping is crucial to accuracy so pay close attention to the vice. I'm experimenting with some modifications to the vice but in general very pleased with the machine.
Tom
 
Back
Top