-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Play in timing chain
- Thread starter WALTER
- Start date
Share this page
jcatnite
Jedi Knight
Offline
According to my Hanes, "Lay a straight edge along the slack leg of the chain. Run and measure the extent of chain slack from the straight edge. If it is more than 0.4" (10mm) the chain should be renewed.
I've always used 1/2" so I guess this is pretty close. The 1275 doesn't have a tensioner does it?
Hope this helps,
JC
I've always used 1/2" so I guess this is pretty close. The 1275 doesn't have a tensioner does it?
Hope this helps,
JC