HAN8L1965
Jedi Warrior
Offline
Tony here are the pics you requested. Went fairly easy, it is a little tricky squeezing the new A arm bushings into position. As you see I used a box to get me to the work heigth. Made it fairly easy. I did have a slight issue on the passenger side the clearence between the top of the pin and the lever shock was minus about a 1/8" it really fought me but I one. Now all I need is a 200+lb neighbor and a floor jack and hopefully the springs will go back in as easy as they came out. I will have to release the top of the pin to accomplish this. Hope this helps someone.
Mark
Mark