• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Pedal box blanking plate

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
Good morning! As I continue to assemble my Bugeye I run across parts that were 'restored' early on and they are not up to the level that I want. One part is the pedal box blanking plate. Mine is a little rough around the edges and a PO drilled a hole in it. Does anyone have a plate that's in good shape they would part with or know of a source?
Thanks, Rut
 
If no luck here, AH Spares 7 pounds 95 plus shipping for XBRK117 for a 'Blanking Plate - Pedal Box'. Doug
 
Rut I sourced one of these via MOSS some time ago. In my box of parts to reassemble but if you need one in a hurry.
 
Jim,
Thanks, Moss no longer lists the blanking plates, but they do have the gasket. I'll keep looking and if I discover I need something else from the UK I'll order one then.
Thanks, Rut
 
I have one that is in decent shape but has two 1/8" holes about 4 1/8" apart. It would not be a challenge to plug those holes.
 
Nelson,
Thanks, that sounds like the one I have! I may end up welding them up and grinding the weld and the pitted areas down.
Thanks, Rut
 
Ray,
Thanks, please let me know.
 
Come to think about it the one I have came from Ashley.
 
Thanks!
Rut
 
Back
Top