Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
SilentUnicorn
Yoda
Offline
I have a PVC valve (application unknown) generic. it has an arrow on it. To what is the arrow supposed to point to.
TIA
mark
TIA
mark
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
PCV Question
- Thread starter SilentUnicorn
- Start date
Share this page
OP
SilentUnicorn
Yoda
Offline
ok then the arrow points to the carb.??
if i suck on one end then it draws freely ( the arrw pointed at me)
if i suck on the other end it draws freely and then stops when i draw harder (arrow pointed away from me)
No i thought (dangerous thing, i know) that the pcv draws from the valve cover Accept under high manifold vacuum conditions. correct me if my theory is flawed.
mark
if i suck on one end then it draws freely ( the arrw pointed at me)
if i suck on the other end it draws freely and then stops when i draw harder (arrow pointed away from me)
No i thought (dangerous thing, i know) that the pcv draws from the valve cover Accept under high manifold vacuum conditions. correct me if my theory is flawed.
mark