• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

MGB Oiling foam air filter

Share this page

E

Eggsy

Freshman Member
Country flag
Offline
Any suggestions on best method of cleaning and oiling the foam air cleaners on my 65 mgb with su carbs.
I hear all sorts of different advice from using gas to clean and engine oil to using specific cleaners and special oil.
how much oil etc. etc.
thanks
 
Well, in my case I always used dish detergent and warm water. Soaked the foam, then squeezed out; repeat several times until the squeezed water is no longer dirty. Then rinsed in clear water several times, squeezed, then set in the sun to dry.

Never had a problem - but I guess it also could depend on the manufacturer's instructions.

Tom M.
 
Do not soak in petrol. These will ignite with one back fire through the carburetor. The reason that they should be bin.
 
Back
Top