• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Oil Sump gasket dressing [sealant]

Share this page

Lin

Lin

Jedi Knight
Gold
Offline
What is the recommended sealant for this purpose? I am planning on using hylomar, but before I do I thought I would check with the authorities.
Lin
1960 BT7 in restoration
1959 Bugeye
 
I use Blue Hylomar with good results (provided you have a nice flat surface on the oil pan). I would not use anything that sets up (e.g. RTV sealant) lest a noodle of it squirts inward and finds its way into the oil.
 
I have best luck gluing the gasket to the pan surface with contact cement, holds it in place during the fitting, & blue Hylomar on the engine pan rail side of the gasket. Ditto on the RTV.
D
 
Thanks, Geo and Dave!
Lin
1960 BT7 in restoration
1959 Bugeye
 
Back
Top