• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Oil Pump Gasket?

Share this page

Bruce_B

Bruce_B

Jedi Warrior
Offline
Putting the new oil pump into my 1275 engine It's one with the slotted drive.

Should there be a gasket that goes onto the face of the pump that goes in towards the camshaft? I don't see one in the gasket set or in any catalogs...just being paranoid.

Thanks....
 
Between the block and the pump? Yes, there should be a gasket.

At MiniMani or your preferred source, look for item 12G730. That's the generic A-series oil pump gasket. (OR, just look at the picture at MiniMania and use your own gasket paper to cut your own. )
 
Thanks Doug....checking at Minimania now.
 
Back
Top