• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Oil Pump Cover Clerance again

Share this page

Bruce_B

Bruce_B

Jedi Warrior
Offline
Well, went to put on the back engine plate on my 1275 as part of the Rivergate 5 speed kit. The oil pump cover doesn't fit right.

I've from from the start to a slot drive to match the SW 5 cam I've got. Rivergate instructions say to order a Rover
oil pump cover, #AEG533 from Minimania. There goes a quick $35 dollars (plus shipping).

Hold on - APT has it for $22. I'll be calling them tomorrow
 
Will the oversize cover still fit behind the flywheel?
 
Good question. I'll ask Bill at Rivergate tomorrow and post the answer.
 
The reason I ask of course is that the new pump I have will not fit either for a BE.

Something is going to have to be modified and I know not what yet.

Going to have to get a lot cooler here to work in the garage, heck to get old, but it has been in the high 90s with lots of humidity and I just can't take it.

Prob will be Oct.
 
Back
Top