Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
having problem w low incosistant oil P in new rebuild 80B, seems to have air in system when I remove the oil feed line from block to oil P switch on fire wall, should there be air in there or a steady stream of oil...oil p takes awhile to build ok at high rps...new pump... I suspect a bad pump or leak in gaskets...all passage ways are cleaned....anyone have this problem
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
oil pressure
- Thread starter JWC
- Start date
Share this page
Gary Lloyd
Jedi Knight
Offline
You are right!! There is a leak somewhere!! There should be no air in the oil!! If it was me I would shut her down, pull the engine (it only takes a couple of hours) and find outwhat is wrong!! It could be serious!! Do you think that you could have forgotten to tighten the oil pump?? You need a beer!!
