Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
having problem w low incosistant oil P in new rebuild 80B, seems to have air in system when I remove the oil feed line from block to oil P switch on fire wall, should there be air in there or a steady stream of oil...oil p takes awhile to build ok at high rps...new pump... I suspect a bad pump or leak in gaskets...all passage ways are cleaned....anyone have this problem
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
oil pressure
- Thread starter JWC
- Start date
Share this page
Gary Lloyd
Jedi Knight
Offline
You are right!! There is a leak somewhere!! There should be no air in the oil!! If it was me I would shut her down, pull the engine (it only takes a couple of hours) and find outwhat is wrong!! It could be serious!! Do you think that you could have forgotten to tighten the oil pump?? You need a beer!!
