Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Anyone know where I could get the line/tube? that connects the gauge from the mid point connection up to the gauge? Actually I have the bottom part of the tube after the mid point but I am missing the female brass connector that attaches to the male end at the back of the gauge and about 2' of tubing. Is there a source for these connectors...appear to be fine thread.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR4/4A Oil pressure gauge Line?
- Thread starter karls59tr
- Start date
Share this page
groupdeville
Jedi Hopeful
Offline
worth checking ebay: I saw a listing for the other part of the oil gauge line this morning.
TR3driver
Great Pumpkin - R.I.P
Offline
TRF has the pipe listed, 202980.
IIRC the nut uses oddball threads.
Don't forget you need a seal between the end of the pipe and the gauge. Original was leather, but I used a small nylon flat washer instead. It should fit over the little nub on the gauge fitting.
IIRC the nut uses oddball threads.
Don't forget you need a seal between the end of the pipe and the gauge. Original was leather, but I used a small nylon flat washer instead. It should fit over the little nub on the gauge fitting.
Check with Ted at TSI he makes braded SS lines for this application https://www.tsimportedautomotive.com/
I don't know but guess it is the length. Call him and ask.