Here we go again, there's a leak from the rear of the motor.
I've flattened and straightened the sump and used RTV to seal it onto the block.
I've used a Marx seal on the rear of the crank.
I wiped the area in the photo and watched the drop reform, it doesn't come from the sump.
I used a camera probe to look up between the flywheel and I don't think that the rear seal is leaking so I think that it might be the camshaft plug.
The camera probe is too large to look up the that corner of the motor.
The photo is a view of the rear slave cylinder side of the motor.
Looks like the gearbox has to come out yet again.
I've flattened and straightened the sump and used RTV to seal it onto the block.
I've used a Marx seal on the rear of the crank.
I wiped the area in the photo and watched the drop reform, it doesn't come from the sump.
I used a camera probe to look up between the flywheel and I don't think that the rear seal is leaking so I think that it might be the camshaft plug.
The camera probe is too large to look up the that corner of the motor.
The photo is a view of the rear slave cylinder side of the motor.
Looks like the gearbox has to come out yet again.