-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
oil cooler install and fitting pictures
- Thread starter chrpark
- Start date
Share this page
If you have a spin-on oil filter already adapted then the easiest way is to use a "sandwich plate" adapter between the oil filter and the adapter (temperature controlles one WON'T fit but regular one will).
If you still have the canister filter then the easiest way is to cut the pipe from the engine to the oil filter and run hoses from those cut ends (with several hose clamps on each end).
As for the oil cooler itself- just bolt it in front of the radiator and call it good!
Bill
(now let the "shark-feed" begin!!)
If you still have the canister filter then the easiest way is to cut the pipe from the engine to the oil filter and run hoses from those cut ends (with several hose clamps on each end).
As for the oil cooler itself- just bolt it in front of the radiator and call it good!
Bill
(now let the "shark-feed" begin!!)