-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
'nother ignition question
- Thread starter Morris
- Start date
Share this page
Offline
That's right; when they open.
It works like this: when the points are closed, the current in the primary of the coil reaches a more or less constant DC value. When the points open, the collapse of the magnetic field around the coil generates a large voltage across the coil. If there were no capacitor, you would just get a huge "spike" of voltage, which would probably arc across the points, frying them, and be too short to light up the plugs very well. But, with the capacitor, you get an AC current in the coil, which dies out over a much longer period of time. The peak voltage across the coil is also much lower--but still a couple hundred volts, if I remember correctly. (So, keep your fingers off those "low voltage" terminals; they ain't just 12 volts!) I've measured this on my bugeye; the AC is about 10 KHz and lasts about 0.8 millisecond before the spark extinguishes.
It works like this: when the points are closed, the current in the primary of the coil reaches a more or less constant DC value. When the points open, the collapse of the magnetic field around the coil generates a large voltage across the coil. If there were no capacitor, you would just get a huge "spike" of voltage, which would probably arc across the points, frying them, and be too short to light up the plugs very well. But, with the capacitor, you get an AC current in the coil, which dies out over a much longer period of time. The peak voltage across the coil is also much lower--but still a couple hundred volts, if I remember correctly. (So, keep your fingers off those "low voltage" terminals; they ain't just 12 volts!) I've measured this on my bugeye; the AC is about 10 KHz and lasts about 0.8 millisecond before the spark extinguishes.