Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I had the exact same issue with a fancy pants wooden shift nob from VB. The solution was remove the metal insert (the threaded metal part) from the wooden nob. Once removed I covered the insert with silicon and pushed it back into the nob. Problem solved! Free and easy
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
noisy shifter
- Thread starter Woodie
- Start date
Share this page
bugimike
Yoda
Offline
If the knob is the rattle culprit, it can be made fast by removing the knob, finding a thin "jam"-nut with the right threads, (radio knob shaft retainer or toggle-switch retainer), threading it onto the shift lever ahead of the knob, re-install knob and "jam-tighten" nut back against it to eliminate rattle!
