• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

New Axle spline

Share this page

G

Guest

Guest
Guest
Offline
I got new axles, splines, bearings, seals and re-built the rearend. The splines were tough to get on the axles but we did. Now that I have put it all together the spline hub and the hub that hold the axle to not seal completely. After a lot of investigation I have determined the ridge on the back of the spline hub is too deep or the bearing is too deep.

ax.jpg


To fix it I am going to cut a shim out of metal. Has anyone else had this problem?

Gary
 
WOW! That's pretty slick! Have you figured out how to make the E-brake work?
 
I'll proabably do like I have in the Pantera and do a line lock. I thought of some other things but the line lock is simple.
 
I made a mount for a panhard rod on the rear end. I welded it when the axle was out which was good. Kept from boiling the oil.

G
 
Back
Top