• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Need help installing steering idler oil seal

Share this page

RickPA

RickPA

Member
Country flag
Offline
Need help installing steering idler oil seal - RESOLVED

How do I install the oil seal at the bottom of the steering idler on a BJ8. There is a metal lip that prevents the seal from being removed from the bottom. Is this lip a part of some sort of cup that is pressed into the idler body? Thanks
 
Last edited:
I have an older idler laying around as a spare
It has the metal lip, and it looks as if that is part of the seal
The idler on my car has a plastic ring over the seal

You need one of these pullers ....

attachment.php
 

Attachments

  • SealPuller.jpg
    SealPuller.jpg
    9 KB · Views: 152
The idler is opposite the steering box ...

attachment.php
 

Attachments

  • DSC_6537.jpg
    DSC_6537.jpg
    37.9 KB · Views: 150
Big Green, did you install the zerk fitting in the body of the idler? Mine doesn't have one, just the square headed plug in the cap to refill the oil. Do you use chassis grease instead of oil?
 
Re: Need help installing steering idler oil seal - RESOLVED

Thanks everyone. It's all back together and about to go back on. Everything is nice and solid.

Cheers all!
 
Back
Top