Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Guest! British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
**Upgrade Now** (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
There is an unused plastic connector next to the fuse box on my '71 TR6 containing two male spade connectors - one with one brown wire leading to it and one with two browns. What is supposed to connect to this? Am I the victim of creative rewiring by the PO? Thanks.
Hi MrPandy. I am not sure if creative wiring has prevailed,but solid brown wires are used to route the unswitched 12 Volt power lines throughout the car. These three normally would connect to the fuse block.If the electrical system is operational you can check and see if there is the specified voltage at the ends of these wires and blank terminals on the fuse block.---Fwiw---Keoke
Hey MrPandy
I'm not sure which brown wire goes where but I think the single brown wire connects to the alternator (although I see it listed as NR-brown and red-on my wiring diagram) and the two brown wires connect to 1)the starter and 2)the fuse box at the fuse going to the purple wires (horn, courtesy light, trunk light, cubby light,...). I got my wiring diagram from www.advanceautowire.com. Go there and click on "Stock Schematics" Very helpful, since the diagram I had previously was riddled with errors.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.