I am not sure what the problem is (why I am here). I have swapped by float bowls which have plastic plugs for late 70s bowls from MGB with no plugs; thought the float bowl plugs and new O-rings might be leaking along with leaking gas past the gaskets; the latter which to me sounds like the bowls are filled with gas all the way to the top ( I would think they should only fill to about 1/2 full). Thought it might be the needle valves allowing the bowls to fill to the top; so replaced them with GROSE-JETs, checked and adjusted the float height above the carb surface for the correct ht. (about 16-17mm); they both are still leaking gas past the gaskets. Please help me with what the problem could be.
Thanks,
Dan
Thanks,
Dan