• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Modified Thermostat housing for a '74 B

Share this page

True. On the next one I'll add the extra notch that way I can use it for any year.
 
confused0031.gif
Seems to be a lot of trouble modifying an old one, when for 20 bucks you can have a new one from Moss and just bolt it on. JMHO. PJ
rolleye0012.gif
 
Believe it or not it only took me about 4 minutes. 1 Minute of waterjet cutting and 3 minutes of grinding.
 
vping said:
If you've been following this thread, here is the modified housing.
10-28-07-ThermostatHousing.jpg
Click to expand...
The studs appear to be a little long, or are those for the SUPERCHARGER mounting bracket? /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
 
That's why I asked about the bolts. A buddy brought these over when we pulled the engine and when I started to re-assemble, realized they were too long. I have a few old studs & one new one that are the right size but might use the bolts instead.
 
Stainless bolts would look nice.
 
Back
Top