• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Mini Engines/Transmissions/Heads/Cranks

Share this page

tony barnhill

tony barnhill

Great Pumpkin - R.I.P
Offline
I just uncovered 5 or 6 engines, heads, extra cranks, transmissions....if anybody needs anything, PM me.
 
Any 1275 S from about 1967?

Bruce
 
I know you said to PM you but.... What vintage are the gearboxes? 3-synchro, 4-? Magic-wand, remote, or rod-change? Were there any flywheels with the collection and if so were they 1-piece or 2-piece?
 
Doug - I don't know anything about Mini's & have no idea where I bought all these...they're the type that has the transmission under the engine driven off the crankshaft..I think there are some flywheels/clutches in the bin - I'll look....what are the identifying features?
 
Hi,

With over 40 years of production the Mini did evolve and parts did change. Sometimes the casting numbers help identify parts. I'll work up a list and see if I can locate some pictures then PM you. Give me a couple of days to pull that together. Thanks.
 
Hi Tony,

Are any of the engines 1275's ? You can tell by the orentation of the heater tap, near the 4th cyl. If it is aligned prependicular to a line drawn through the cyl's it is a small bore(850,998.997,1100) if it is at 45 Degrees it is a large bore(1275).

Thanks

Roger
 
I just got back from N'Awlins...will look at them tomorrow
 
I have 1 complete 1098 engine...the rest have heads with "2A629" stamped on them (at least the heads I could get to in a box)
 
Back
Top