• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

mastet cylinder leaks

Share this page

H

healeydan12

Freshman Member
Country flag
Offline
I just put 1000 miles on my new combination clutch/brake
Master cylinder on my bug eye. It is pushing brake fluid out the vent hole in the cap
What is going on?
 
If you mean that you see a little squirt when you have the cap off and you release the clutch then that is correct- the fluid returns to the resevoir with some force.
BillM
 
Billm said:
If you mean that you see a little squirt when you have the cap off and you release the clutch then that is correct- the fluid returns to the resevoir with some force.
BillM
Click to expand...

No. I mean when the cap is on. There is so much pressure that it pushes fluid out the gasket. I tightened the screws and it stopped leaking there but it still comes out the cap vent hole.
 
Wow, check for overfilling.
 
healeydan12 said:
No. I mean when the cap is on. There is so much pressure that it pushes fluid out the gasket. I tightened the screws and it stopped leaking there but it still comes out the cap vent hole.
Click to expand...

Which aftermarket MC did you buy? I've rebuilt in the neighborhood of 300 originals and never encountered such an issue. Something's not right. You are certain you don't have a leaking fitting?
 
Last edited:
Air.
You hit the pedal, you compress the air in the lines, let go, it expands quick and squirts fluid out.
Seen it.
Lots more than once.
Dave
 
Back
Top