• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 lower radiator hose fitting

Share this page

On the radiator side, I put the clamp with the head of the screw aimed up and use a long screwdriver to reach it.
On the pipe side, I have the head of the clamp positioned where I can tighten it from underneathe
 
Having a set of 1/4" drive sockets is invaluable for awkward clamps. 1/4", 5/16" and 7mm are the usual hose clamp sizes:

screenshot.2405.jpg
 
Back
Top